How to prevent ovarian cancer

Ovarian cancer kills thousands of women in the world. Unfortunately, most often it manifests itself at the final stage. However, there are a few tips to prevent ovarian cancer. I certainly not the doctor, but these tips General plan, and not medical.
Instruction
Difficulty level: Easy
step 1

Eat more greens: grass, broccoli, spinach. Drink green tea, and black, of course, too. These products contain kaempferol.
2 step

Do not ignore any pain in the lower abdomen.
Every six months, go through examination by a gynecologist, even if nothing is bothering.
3 step

Carefully come in the choice of contraception! Accept only those funds that prescribes your gynecologist. Plus don't use birth control pills. Doctors always say that you can drink alcohol until you decide to get pregnant, but studies show that the longer a woman uses the pill, the higher the risk of disease.
Be healthy!

As effectively to drink vodka from a stack

Wait for kakogo or holiday,in order to impress their friends,effectively drinking vodka from topcol pronunciation of toast on holiday,and when the vodka is bottled in piles,put it that part of the elbow that goes into the continuation of the hands from the back of his hand,gently lift the stack of vodka to his mouth,pour soderjimoe threw back his head back,and throw the empty stack so that it flipped in the air a few times,then catch it and put it for example on the table.
Instruction
Difficulty level: Difficult
step 1
First you need a reason to drink. This can be as a party,birthday,holiday,whether it be family or friends.
2 step
Actually secondly you need to go to the store for vodka,for it was what to drink and how to do it. Does not matter absolutely,kakoulidou you drink,the only thing more expensive vodka will be a pity if you spill it.
3 step
Thirdly, after the start of the holiday palpate for a little courage,it really helps and everything works much better than if you did absolutely sober.
step 4
Accordingly fourth, wait for the right moment when one of your friends will pour vodka,however it can do and visado better to pour not to the edges of the stack,so that it was comfortable to drink,and the content was poured past. I can say a toast to courage.
5 step
And finally the last stage is himself a spectacular reception vodka inside. Put a stack on his elbow,respectively, on the part of the elbow that goes into the continuation of the hands from the back of his hand,the southpaw is to put the stack on the elbow of the right hand,the right-handed,of course on the elbow of the left hand;after the stack placed on the elbow and made a toast,not a very fast movement,rather smooth,bring the stack to the mouth,which should be opened wide enough the contents of the stack does not shed past,then tilt your head,vodka hit inside,then a fast movement to rock the elbow,so that the stack is turned over in the air a few times and catch her, but carefully,so that the stack fell on palmOne for impressive else, and put a pile on the table.

How to choose a tablecloth

Choosing the right cloth allows not only to successfully emphasize serving your table, but without much cost to make your living room stylish and cozy.
Instruction
Difficulty level: Easy
step 1
Choose a tablecloth in accordance with the occasion and purpose of the feast. Colorful tablecloth for children's parties, will be inappropriate for a romantic dinner by candlelight. Bright tablecloth will create an atmosphere of joy's birthday. Intricate embroidered tablecloth will create the right mood for Christmas and Easter.
2 step
When choosing tablecloths should consider the psychology of color: red and yellow hues friendly, blue and green on the contrary, cold and restrained.
3 step
To choose the right size tablecloth, add 40-50 cm to the size of your table. The cloth feels best when hanging from the edge of the table 20-25 cm but not below the chair seat. If the cloth is lowered less than the table looks ugly, if more, it is inconvenient for seated guests. Although, if you want to hide the legs of the worn table, the tablecloth can hang down below ;)
step 4
If the table is flimsy floor, you can put under the cloth lining of one-colour cotton flannel that keeps the cloth and prevents it from stretching, and mutes the sound of dishes.

How to print

All we wanted to learn how to quickly print. This will save time at work or to speed up communication in chat rooms and forums. Here is a quick guide on what it is better to start and how to finish.
Instruction
Difficulty level: Difficult
step 1
Note the location of the keys. If You only recently sat down at the keyboard, you'll probably find every letter of 10 seconds. 6 characters is not the best speed, it can be increased as much as 100 times. First you need to remember which key it is in. It is to remember, not to study. To do this, look at the top row of Your keyboard for about 10 seconds, and then try to reproduce it on paper. Repeat the exercise several times until automatically will not be able to memorize to say the whole series. Do the same with the middle and bottom buttons line. Now, try to type the alphabet from “a” to “I” several times. When You do it fairly quickly, consider that the arrangement of the keys You have learned.
2 step
Avoid typos. The speed of the set collapses because of the constant typos. They usually do due to fatigue, awkward postures, excessive haste. Try to sit upright and not in a hurry. Also, correctly choose the keyboard. For the pros the best split ergonomic keyboard (buttons on the right and left separated by blank space), and for those who have not yet moved in this rank - normal curved keyboard.
3 step
Use training programs. Of course, the quickest set provides typing method. It was invented back in the early days of typewriters. Typist so quickly gained the text that the machine on which the letters were arranged according to the alphabet, constantly jammed. Then came the arrangement of the keys, to which we are accustomed to now. The essence of the ten-finger method is that all the fingers of both hands. They are located on the middle row, on sections of a number of five” and “ALG”, and to print only move one finger up, down or sideways. Disadvantage of this method is that it is rather difficult to get buku “And”. To learn this method, you can use the program “Solo”. Using this program, You will practice each key individually, and the most difficult letter combinations. With its help it is possible to achieve speeds up to 10 characters per second. Success!

How to make a generator elektroenergii of reels for fishing rods

Device
Somehow putting things in order in my room I found my fishing rod, in which I accidentally broke the leg of the coil, well to the fishing rod, you can buy a new coil, and this what to throw out? Neeeeed need to think of something, and devised a generator of electricity on the basis of this coil as a potential rotation axis is equal to 5 rotations from one rotation of the handle of the coil is very productive.
Instruction
Difficulty level: Easy
What you will need:
Actually the coil itself
Wire
Glue
Plastic discs with a diameter of 2 to 3 cm or great pass (can be borrowed from the mechanism broken cassette recorder or VCR
Gum
Paper or melting silicon
An ordinary motor with a groove preferably large
step 1
Disassembled coil
First you need to disassemble the coil, to do this, click the button on the reel and take it off, then pull the plug and take off the nut, you can then remove the rotating mechanism.
2 step
How should look the installation of the motor on the leg of the coil
After you take the motor and attach it to the leg of the coil by setting the motor on the leg and holding the two pieces of wire covering the motor and the coil and sacla the place of contact of the motor and legs.
3 step
Great groove will transmit its movement muanikau on the motor
Take the plastic disk and cut it at the edges of the recess so that the gum did not abate in the center to make the hole bigger to install this ROM on a rotating axis, in my case, I just turned one item securing it with a piece of paper between the rotating axis and the detail and planted her already found a groove with an old washing machine and inside has filled the paper with a hole in the center, so that the groove was during the rotation exactly in the center so that no imbalance (can there pour the melted silicone)
step 4
Put a rubber band
Almost everything is left to stretch the rubber band between the large and the small groove of the motor and to rotate the reel, moreover, that one rotation of the handle is a 5 spins so even with a large groove the motion is passed at the little which significantly increases the speed.
So I was hoping to infect the phone or the battery, but my phone consumes charging 5 volts, and the generator produces 10 volts

How to make CTP

CTP is a mandatory third party liability insurance. To drive a vehicle without it prohibited. Therefore, every car owner should have an insurance policy OSAGO. How to get it, read below.
Instruction
Difficulty level: Easy
step 1
Calculate the cost. CTP - binding contract of insurance. So whether you want it or not, it will have to conclude. Calculate how much it will cost you. To do it on the website any insurance company (http://www.osago-ws.ru). The cost of the policy depends on the brand of the car, power of the engine, age and experience of the driver and the period of accident-free driving. If last year you got into a accident, you are entitled to a discount of 5%if the same had been in this unpleasant situation, you have to pay 55% for one accident and 145% for two.
2 step
Go to the insurance company. But before you go there, you first have to choose. Look online, ask around from friends, where better and cheaper. When the selection is finished, go to the company. Take a statement of conclusion of the contract, passport or other document proving your identity, the certificate of registration of the legal entity (if you face legal, of course), technical passport of the vehicle, driving license and proof of ownership of the vehicle. In addition, many insurance companies provide the option of applying for insurance through their site.
3 step
Be careful.
For anybody not a secret that the contract should be read carefully. Especially the fine print. Be attentive to the nuances: fire and arson different things. If your car is insured against fire and burned him, any compensation you will not receive. Same thing with theft: if your car was stolen, and after 2 meter hit a pole and ran away, stealing as such did not take place and the compensation you will not receive. Note whether the cost of a franchise in the cost of insurance as a refundable damage: repair or cash, and does it shock-absorbing damage.

How to take a playful kitten, so you can safely go about their business?

Well, finally in Your home came the long-awaited kitten. Energetic, playful, funny, funny. He follows You everywhere, stopping You, distracts you from work. Of course, You are very fond of, but he is able to play with You forever, and You have a case and You can't devote all my time to him alone. How can that be?

Instruction
Difficulty level: Easy

What you will need:
1. Clean empty box, around the size with the cat.
2. Toys for cats, balls.
3. Fur mice.
4. Feathers are machalke.
5. Clockwork mouse
step 1
Now will pick up the box.
1. In a box with 5 sides need to make round holes, one on each side, so that your kitten could go stick their legs, or head.
2 step
Balls
Now in a box with holes placed all these cat toys: balls
3 step
Fur mice
Add the fur of the mouse,
step 4
Clockwork mouse
clockwork mouse should be, and that kitten started the game, get the mouse and place it in a box of other toys.

How to learn to make the output power of two hands

In gym class hanging out at the bar, like sausage? Or out in the yard, I envy the guys that are doing the mind nepostizhimoye things. If Yes, then this tutorial is for you.

Instruction
Difficulty level: Difficult

What you will need:
Desire and perseverance

step 1
First, you need to learn to catch up. If you don't know never, we begin with push-UPS. You need to do push-UPS 3-4 approach the maximum number of times, i.e. if the first approach, you will do push-UPS 10 times, the second 8-9 and so on. You can also take a heavy dumbbell (any exercise with them will do you the benefit) and the resistance bands: wrist, shoulder, chest-in the initial stages of the training all good.
2 step
Now we can catch up and should continue to develop this skill. About the balls you can forget, because such use as push-UPS and pull-UPS they will not bring. For pull-UPS should be given 30-60 minutes a day at least. You can split the classes into several parts. For example, I lifted in the morning, afternoon and evening maximum number of times. Once a week we play in the ladder (when it first came once, then two, then three and so on). Do not forget that muscles grow between workouts, so after three or four days of practice make a break for one day!
P.S. You do for yourself, so don't saccule, etimates almost to the floor, looking forward, podtiagivayus to chin without jerks.
3 step
If you have already moved at least 10 times, learning to do the output one, it needs to throw his hand on the bar, this position is called the box, slightly to press on and get off at the stop. Now for a good output on two need to be able to do the exit on the left and right hands.
step 4
Besides entering the one you want to spend time with not only the usual pull-UPS, and pull-UPS to chest.
5 step
In the end, after all of these exercises you will become stronger, you need to exit on the two the muscles and one day you will succeed koryavenko output into two. This output is the base for many items so developing it, you will be able in the future to train more complex exercises.

How to write an original Christmas SMS

Soon, very soon on December 31, and thus, not far the time when your mobile phone is once per minute to truncate, telling us that someone from friends, relatives or acquaintances want to congratulate you for your new year SMS.

Be aware that you do not forget nice. But when every second Epistle old, and they must be congratulated in ancient Rome - bad start to think about the mental abilities of their friends and acquaintances.
But the most interesting is that you also need to respond to greetings, and send your friends a reply new year sms. How can you not be a new year spammer?

Instruction
Difficulty level: Easy

step 1
As advised by the creators of the resource www.s-novym-godom.ru congratulations relevant! If you write SMS a friend who recently broke up with a man, you can wish her "great love and smaller goats in her garden". If your friend has not been promoted, it is appropriate to wish him "For the new year a good "Dobritsa", then the whole year to grow, grow and grow"
2 step
Avoid abstract concepts of "happiness", "joy", "health". Wish the same thing, but more tangible, real. For example, "mile smile" or "walk-in pharmacy only for condoms"
3 step
If you stood on the slippery path of mailing the same new year SMS before sending check whether the name of the recipient in SMS with the name of the owner of the phone number. Otherwise you remember this will be for a long time)).

How to upload pictures to computer Samsung cameras

This simple action will help you to enjoy your photo masterpieces in full format.
Instruction
Difficulty level: Easy

What you will need:
the camera
computer
installation disc
the USB cord

step 1
Installed software on the computer Samsung Master attached to the camera installation disk.

2 step
Plug the camera to the computer using a USB cord .

3 step
Run the program Samsung Master. Upstairs find the word camera . Click on it with the left mouse button. You receive the word startup . It will stocknum

step 4
After the performed transactions will appear before us all our photos are in the camera. If you want to download all, then click Select all . If you want only selected pictures, then allocated them with the mouse (left button) and while holding the Ctrl key. Click Next

5 step
Now we need to decide where will pour our pictures. We have several options. Put them in a folder that already exists. Then the folder will select from the left window. Or create a new date or name. After clicking Next , we will announce where it will be pumped photo. Then click the start button and watch as pouring shots.
The transaction is completed. You can disable the camera and show pictures at the specified address.

How to make dessert "Apple hedgehog"

Children will be better to eat apples and pears, if you turn these fruits in a fun hedgehogs. For the conversion will take a few minutes and a good mood. Ideal for children's parties.

Instruction
Difficulty level: Easy

What you will need:
pen ink
Apple

step 1
The most difficult thing in the manufacture of a hedgehog is to find an old pen that wrote in school our parents in the middle of the last century. If found, you are very lucky! If the pen is still not found, you can use a cone-shaped cap from a ball-point pen, if it is cut in half (lengthwise). Importantly, procurement is quite pointed.
So. Wash the Apple. Wash thoroughly pen.

2 step
Utegate feather in Apple and rotate it around the axis. Remove the stylus with a piece of Apple, which happened when scrolling. Insert the piece of the reverse side in the resulting hole. So we need to handle at least 2/3 of the Apple.
The hedgehog is ready!

How to please ANY man (Part two)

This long awaited sequel instructions How to Please ANY Man

In this part I will talk about other elements of the adjustment,

to help inspire confidence!

Again, the basic techniques of NLP!

This is the first Part:

http://akak. ru/recipes/11173-kak-dobitsya-raspolozheniya-lyubogo-cheloveka

Instruction

Difficulty level: Difficult

step 1

Another very important element of the adjustment is the VOICE !

So you have to adjust to adjust.

When you are unable to see the person and you talk to him, for example, by telephone, this element is particularly important, so as to adjust the position of the interlocutor does not make sense.

So, what are the characteristics needed to adjust?

2 step

Loudness.

You begin to hear a man say.

Loud or Quiet?

And depending on this, you begin to speak the same way.

If a person says a calm, quiet voice say as well.

But if a person shouts, no need to start yelling, you just need to increase the volume significantly, but not much !

The important thing here is congruence .

If anyone knows what it is, then simply explain:

Congruence is a normal match.

For example: if you will always speak softly and suddenly starts to talk very loudly, it would not be congruent=)

3 step

The speed of speech.

Here we need to catch the speed of speech, quick man says or slowly?

The person who loves to talk fast (because he was going too fast flashing images in my head) not like it, if you will speak slowly.

Start to talk in his normal speed, and slowly accelerate or samesies depending on the situation.

step 4

The pitch of the voice.

Everything is simple.

Listen to the pitch of the voice and begin to adapt.

If a man speaks in a high voice, start, too, so voice chat.

If said in a low voice, lower yours.

Again I emphasize:

You don't have to leave your comfort zone .

If a girl tells a very high voice, literally Peeps, just raise.

5 step

Do not try to adjust to the accent, dialect and diction, because the interlocutor is likely to think that you mimic!

6 step

In General, I told you all I know about tuning the voice, I hope you will successfully apply.

And remember, the main thing is PRACTICE!

Oh and for dessert, will talk about the offset:

7 step

What is the offset?

The offset is the opposite of Adjustment.

Why do we need it?

There are times when you start to talk nasty to you people.

And when you rebuilt, then the communication starts to be negative, and slowly stops.

For example:

Calls you on the phone some man who starts to talk about their problems:

He (slowly): - Ala hi there How are you doing?

You (cheerful voice): " Hello! Hi, Vasek! I'm fine and wonderful.

And then the other person begins to feel a hard set and said, listen, I'll call you back.

8 step

A little bonus:

Smile when you talk on the phone, the other person can hear it=)

You can also write a statement about rapport and adjustment other items (deeper)

How to get rid of cold on the lip?

Cold on the lips is a manifestation of the herpes virus, it relapses occur as shockingly cold on the lips. The sad part is that carriers of the herpes virus are almost 90% of the inhabitants of the earth. The aggravation begins in autumn and spring.

Instruction

Difficulty level: Difficult

step 1

Protection.

With the onset of cold weather do not allow yourself to warm, protiviti etc. Protect lips they weak spot. Use protective fatty lip balms, wear a warm scarf.

2 step

Treatment.

If a cold has already appeared, then buy pharmacy Zovirax or Viru-Merz, these tools will help speed up the process of getting rid of the sores up to 4-5 days (usually cold lasts 10 days).

3 step

The disguise.

Now in drugstores sold almost transparent patch is very small, it is applied on a cold and masking it. The patch is invisible and it does not feel.

step 4

The specialists.

If the cold appears more than once in a season, should refer to a specialist, for example, the research Institute of influenza. Doctors have treatment method, special ointments that are made according to the recipe, etc.

Good luck!

How to choose a steamer?

The most useful food is steamed! And in order to cook healthy food at home, you need to buy a steamer! But how to choose the right model of all that is presented in the window?

Instruction

Difficulty level: Easy

step 1

First decide on the size and function of steamers. They come in several forms: embedded, hybrid and table.

2 step

Embedded steamer suitable for modern kitchen in the style of hi-tech. It is designed for frequent cooking. Often these devices are able to collect enough water for cooking various dishes. Hybrid double boiler combine several functions. For example, an oven with the function of double boiler, microwave (microwave oven) with steamers. Table steamers good for infrequent use. They take up little space and is suitable for kitchens of any size.

3 step

Note the power and capacity of the steamer. The capacity of the device should depend on how many people you intend to feed every day. The bigger the family, the greater must be the capacity of the device. Table steamers are equipped with multiple baskets for cooking. If you want to cook several dishes at once, buy a steamer with three baskets. The tray in the steamer should be deep enough in the cooking process you do not have often to drain the condensate.

step 4

The steamer must be equipped with automatic shutdown in case of insufficient water level. Well, if your steamer is equipped with a water level indicator and a hole topping up during work.

5 step

Standard double boiler 2 modes: defrosting and cooking under the influence of steam. There is a third mode - "steam blow", it is suitable for rapid defrosting or heating products.

How to choose a coffee grinder?

Love the grain coffee? Then such a thing as a coffee grinder, you just need

Instruction

Difficulty level: Easy

step 1

The body of the grinder must be made of high quality metal: steel, brass or aluminum. If you brew coffee with the help of the Turks, you fit an inexpensive coffee grinder with blade grinders.

2 step

If your coffee has a coffee machine, you will approach the grinder with mill.

3 step

If the grinder is sold for a cafe or restaurant, please note the phone with a conical semi-professional or professional coffee machine with integrated coffee grinder.

How to do the officer's output power

Recently installed Sony Vegas Pro, and this was the first video in it, so there are a couple of flaws in the transitions.

My how to learn to make the output force on the two arms liked a large number of people, so I decided to further develop this theme. But when I started writing, I have noticed that given the above statement, not much to write. So I made a video with all the elements that can and gave a description of one of them, which is called the officers ' output.

Instruction

Difficulty level: Easy

What you will need:

My first statement on this subject

step 1

First, you need to learn how to make out on one hand. For what? In order to be able to throw your hand in the box.

2 step

Learned? Now you need your other hand to push off from the bar and sharply perekatilsya on the other hand, behind his back. If you do it slowly, it will be quite painful.

3 step

Now the step that causes more trouble than all the rest. Need to squeeze in the back way and sit on the horizontal bar. Cause he difficulty because not all fit gluteal muscles. Make it happen, you need to do push-UPS in this position up there, up where you can, and during the push-UPS a little swing and using inertia to reach the stop.

How to cure sore throat

Angina is a serious disease that requires proper treatment and constant care for the sick. What you need to do and what you can learn when you read the instructions below.

Instruction

Difficulty level: Difficult

step 1

More drink. At high temperatures, the evaporation of moisture from the skin increases. Therefore, to prevent dehydration, you should drink as many fluids as possible. In addition, water rids the body of toxins derived from tablets. You can drink the sour juices, but it is better suited jelly from the berries, it coats the throat and reduces pain.

2 step

Treat throat. Gargle need often - every two hours. You can use the Iodinol, furatsilin, extracts of herbs: chamomile, sage. For inhalation use oil solutions of mint, pine or eucalyptus. You can drink hot beer and use special sprays.

3 step

Adjust body temperature. Remember to bring the temperature down until it reached 38 degrees, it is not recommended, the body fights disease. The only exception is children and people with diseases of the cardiovascular system. To bring the temperature down is better than the usual antipyretic. If you decide to take antibiotics, it is better to use special, for the upper respiratory tract (even better if this kind of medicines you are prescribed by a doctor). Person suffering from angina cannot be wrapped in blankets or drink hot tea. This will only lead to more overheating. Better to put the patient on the forehead with a cool cloth or wiping with cool water.

step 4

Protect the patient. Angina is easily transmitted disease, so it is better to protect the patient from contact with other people, or to treat it nobody will. Angina is a very serious disease, take seriously. It can give complications, so it is best to undergo treatment under supervision of doctor.

How to choose the right furniture?

Buying furniture it is responsible. It is not cheap and bought with the expectation of long-term use. It is therefore very important to make the right choice .

Instruction

Difficulty level: Difficult

step 1

That furniture looks good in the shop window, does not mean that it is as well it will look in your home. For example, if the room is small, not worth buying it dark, and even more bulky furniture.

2 step

Visualize the selected furniture in your room! Like? Now, think about whether not too it will annoy you after 6 or 10 months? If you take the furniture for the nursery, ask the child's opinion.

3 step

I now proceed to the questions of durability and longevity. First, look at the thickness of the chipboard. The thicker the material from which the furniture is, the better. If the furniture seems flimsy even - refrain from buying.

step 4

Assessing the stability of the structure, a little posetite her. If the chair or sofa, sit and sit. In General, try to consider the furniture as best as possible.

5 step

Evaluate the fastener between the parts. Check for cracks, chips on the corners. If visible defects not hesitate to buy.

How to choose the right powder?

From what powder you choose depends on not only how well you look after properly matched powder can ruin your skin! Select the correct powder!!!

Instruction

Difficulty level: Easy

step 1

Powder qualities is more suitable for oily skin. It perfectly absorbs fat and matifies skin. And dry and fading skin powder may be further dried.

2 step

Loose powder gives a weak shade and lightweight mattifying effect. Usually it is used together with the creams. Apply it thickly on top of Foundation, when he is well absorbed. This powder is well absorbed and distributed in the skin, making facial features especially soft and gentle.

3 step

Compact powder is very practical: it is always at hand and easy to use at home. This powder is designed for those whose skin for for starts to Shine. Compact powder is ideal for dry skin.

step 4

Powder balls perfectly evens out the complexion, creates a slight mattifying effect and makes pores seem to disappear. This type of powder will give your skin a fresh and radiant look.

5 step

Translucent powder is suitable for any complexion. Its disadvantage is that it does not hide minor imperfections and is good for those whose skin and no makeup looks almost flawless.

6 step

Antiseptic powder does not contain fat and aromatic substances. It consists of antibacterial and anti-inflammatory supplements. This powder is suitable for irritated, distressed and Allergy-prone skin. Not suitable for dry and normal skin.

7 step

Shimmering powder contains gold or silver particles. In artificial light it creates a beautiful shimmer to your skin. However, when fluorescent light makeup, which is based on shimmering powder, it will look unnatural. This is the basis for evening make up.

8 step

Bronze powder is perfect for tanned skin. It is good for summer or for those who use tanning all year round. Bronze powder substitutes and concealer, and blush. This powder emphasizes the contours of your face, but will not look pale, not tanned skin.

How to cheat on the exam with a bottle of Cola ?

You didn't learn anything, and before the exam remain a matter of hours?

And from this reference or credit depends very much ?

Then the instructions will help you quickly make a very simple, effective and invisible to the eyes of the teacher spur :)

Instruction

Difficulty level: Easy

What you will need:

Coca-Cola

Scanner

Graphic editor

The printer

step 1

Take a bottle of Coca-Cola.

2 step

From it we will need a label

3 step

Put the label on the scanner.

step 4

Images label.

Erasable with her the whole text (composition), leaving only the logo.

5 step

Further, in the graphical editor, in place of the erased standard words (composition), writing my spur.

Try to write in a compact and concise, as designated on the label, not so much.

6 step

When done, print the resulting creature and carefully cut along the outline.

7 step

Then carefully glue the label back on the bottle.

8 step

All invisible spur ready :)

you can safely forwarded to pass the exam :)

How to learn to make the output power of two hands

In gym class hanging out at the bar, like sausage? Or out in the yard, I envy the guys that are doing the mind nepostizhimoye things. If Yes, then this tutorial is for you.

Instruction

Difficulty level: Difficult

What you will need:

Desire and perseverance

step 1

First, you need to learn to catch up. If you don't know never, we begin with push-UPS. You need to do push-UPS 3-4 approach the maximum number of times, i. e. if the first approach, you will do push-UPS 10 times, the second 8-9 and so on. You can also take a heavy dumbbell (any exercise with them will do you the benefit) and the resistance bands: wrist, shoulder, chest-in the initial stages of the training all good.

2 step

Now we can catch up and should continue to develop this skill. About the balls you can forget, because such use as push-UPS and pull-UPS they will not bring. For pull-UPS should be given 30-60 minutes a day at least. You can split the classes into several parts. For example, I lifted in the morning, afternoon and evening maximum number of times. Once a week we play in the ladder (when it first came once, then two, then three and so on). Do not forget that muscles grow between workouts, so after three or four days of practice make a break for one day!

P. S. You do for yourself, so don't saccule, etimates almost to the floor, looking forward, podtiagivayus to chin without jerks.

3 step

If you have already moved at least 10 times, learning to do the output one, it needs to throw his hand on the bar, this position is called the box, slightly to press on and get off at the stop. Now for a good output on two need to be able to do the exit on the left and right hands.

step 4

Besides entering the one you want to spend time with not only the usual pull-UPS, and pull-UPS to chest.

5 step

In the end, after all of these exercises you will become stronger, you need to exit on the two the muscles and one day you will succeed koryavenko output into two. This output is the base for many items so developing it, you will be able in the future to train more complex exercises.

How to take a playful kitten, so you can safely go about their business?

Cat gets мячикиhttp://www. yasni. com/recipes/new and different mice out of the box with holes.

Well, finally in Your home came the long-awaited kitten. Energetic, playful, funny, funny. He follows You everywhere, stopping You, distracts you from work. Of course, You are very fond of, but he is able to play with You forever, and You have a case and You can't devote all my time to him alone. How can that be?

Instruction

Difficulty level: Easy

What you will need:

1. Clean empty box, around the size with the cat.

2. Toys for cats, balls.

3. Fur mice.

4. Feathers are machalke.

5. Clockwork mouse

step 1

Now will pick up the box.

1. In a box with 5 sides need to make round holes, one on each side, so that your kitten could go stick their legs, or head.

2 step

Balls

Now in a box with holes placed all these cat toys: balls

3 step

Fur mice

Add the fur of the mouse,

step 4

Clockwork mouse

clockwork mouse should be, and that kitten started the game, get the mouse and place it in a box of other toys.

Download video of our cat, who gets out of the box, through the holes, cat toys,

http://depositfiles. com/files/zlefe6soj

How to cook shrimp, baked with potatoes and cheese

Written under the impression cooking instructions Freziya.

This dish is not a refinement. Prepared quickly (but not quickly) and the strength of a man of any age, who wants to please their relatives, having separated at least for a time the female half of the machine .
Instruction
Difficulty level: Easy
What you will need:
shrimp - 800 g
potatoe - 1000 g
Suluguni cheese - 200 g
a creamy mayonnaise sauce - 200 ml
lemon - 1/2
100 ml vegetable oil (sunflower, olive, refined
salt, herbs (parsley or dill)
step 1

Frozen shrimp is omitted for cooking in boiling slightly salted water. Cook shrimp until
until they are bright orange in color and float to the surface of the water or 3-5 minutes from the moment of boiling water.
After removing from heat, leave the shrimp in the broth for 20 minutes, so that they are more juicy, and so delicious.
2 step

Potatoes cut into slices and fry in butter on both sides. Then put it on a pan in a single layer.
Boiled shrimp to clean the shell. On this subject shot a video clip (see the beginning of an instruction as an illustration). Will be deleted by the black prailine located on the back. And put on a layer of potatoes laid in a pan on the bottom.
Sprinkle the shrimp with lemon juice.
To make the sauce, taking sour cream 2 tablespoons and 1 tablespoon of olive mayonnaise provençale and mixing them up, add water, bringing the volume up to 200 ml
The remaining potatoes to put on the shrimp and pour all the sauce.
Salt to taste sprinkle each stacked layer products.
3 step

Then grate the cheese on a coarse grater and sprinkle laid in the pan products.
The pan without closing the lid, place in pre-heated to 175 degree oven. And bake the dish for 4-5 minutes.
step 4

Serve baked shrimp with potatoes and cheese on the table, decorating a La carte dishes lemon or parsley or dill.
5 step

And you could decorate!
And now Bon appetit!

How to handle pocket "in the frame"?

There are many types of pockets. Pocket "in the frame" as a rule, can be seen on the classic men's jacket or on the back of the pants.
Instruction
Difficulty level: Difficult
What you will need:
Knowledge of terminology.
Details of the cut.
The sewing machine.
The iron.
step 1
The terminology.
The attaching connection of small details and larger. Nastraivanie connection of the two parts by blending one part to another machine stitch. Turning of connection of the two parts on the slice, followed by screwing out them on the front side. The inflorescence emerge - temporary thread pinning obtachnyh edges of the parts, in order to give them a certain form. Priduzivanja - reducing the thickness of the seams, creases, folds and edges of the parts with iron. Sewing thread - fastening sections detail to prevent from fraying.
Details of the cut.
The main part is the place where will be located the pocket. The valance is a small piece of cloth the color of the product, is the aesthetic function. The obtachkoy item pocket, which then forms the processed entry into the pocket. This is part of the fabric of compacted adhesive gasket and zautyuzhenny in half. Adhesive gasket material to seal and prevent stretching. The lining of the pocket which constitutes the volume of the pocket.
2 step
Outline four lines - two horizontal and two vertical. Then from the inside to the main part paste adhesive strip, thereby preventing stretching of entry into the pocket. Zautyuzhenny obtachku impose on the part of the fold to the top of the chalk line so that its ends are equally beyond the vertical line. Pritachivajut it to 0,5cm from the fold, securing the line in the end. Similarly protecive and second obtachku, so that the fold approached the bottom chalk line. Then cut the log into his pocket. Cut between the lines with a cut in the form of triangles > <, not reaching vertical lines 1,SSM Through the slot pocket, inside out, turn stocks Welt. From the front side spawn frame and pritagivaut. The triangles at the end of the pocket clip dual machine stitch.
3 step
Slice valance obmanyvajut by a special machine. Then it is applied on the lining of the pocket and nastraivaut at a distance of 2mm from the frayed edge. After that, the lining of the pocket without valance impose on the bottom obtachku. Slices equalize and pritachivajut seam sm The lining of the pocket with nastrochennogo the valance impose on the top obtachku. Slices equalize and pave the engine line in the seam attaching the Welt. The lining obtochuyut seam in 1cm, starting and ending at the base of the triangles. In the end remove all the stitches temporary appointment and pritagivaut ready pocket. Ready!

How to make a real Cuban Mojito?

Summer is the best time for refreshing cocktails and parties. There are many reasons to celebrate a holiday or just a Friday with friends. Mojito is a traditional Cuban refreshing drink. He is sweet but sour, fresh and invigorating. This is the best choice for large companies and fun party. The difficulty level is moderate.
Instruction
Difficulty level: Easy
What you will need:
White or light rum (Bacardi Mojito) 50-60 ml
Lime
1.5 teaspoons of sugar
8 sprigs of mint
soda water, mineral water
tumbler
straw
ice
step 1
Put mint leaves in a tall glass. Carefully pour in the syrup or lime juice, the leaves can be slightly rumpled, but it is impossible to tear. Floating leaves of mint in the glass does not give the cocktail of elegance. Pouring mint leaves with lime juice we get from them extract oils, which give the cocktail a unique flavor.
2 step
After mixing lime juice and mint leaves, fall asleep with a glass of crumbling ice, the ice should be on top, so that leaves remained on the bottom of the glass, and not floated on top.
3 step
Add rum, followed by soda. Lightly stir and ... enjoy!

How to cook fish soup "quick and dirty"

Want to cook fish soup? But you don't want to mess with the fish!? Well then, don!

Instruction
Difficulty level: Easy
What you will need:
potatoes
carrots
bow
figure
Bank fish Koserow
herbs, spices
step 1

Take a clean pot, type of water, put on fire.
2 step

Potatoes peel and medium dice (or who feel more comfortable) . Immerse in a pot of water. Salt.
3 step

Of onions and carrots cook zazharku:
peel the vegetables, chopped (carrots can be rubbed on a grater), lightly fry in vegetable oil.
step 4

When the water in the pot to boil, add the rice (preferably rice rinsed).
5 step

Open a jar of canned fish (best saury or salmon oil or its own juice), thoroughly mash with a fork the contents (or just snap into small pieces and add to soup.
6 step

Add zazharku, spices, herbs.
When the rice and the potatoes are ready, remove from heat.
7 step

Bon appetit!

How to block content sites in Opera?

If you went to the site, and you bothering any image or banner, or flash, or advertising), you can easily disable it all through the Opera browser

Instruction

Difficulty level: Easy

What you will need:

Opera

step 1

Now, you are on a site with annoying picture. And you want it as soon as possible to remove from sight. And you use the Opera browser .

The first step is to right click the mouse on any empty space on the website.

2 step

Then in poyavivshemsya menu click on the line to Block content

3 step

Now you can choose what you want to block this site.

Click on your hated the picture. But you will see that the rest of the picture will also be blocked in order to remove only 1 specific item, press it with Shift.

step 4

Now click Save

Everything is ready! The element will be hidden!

How to grow mushrooms at home and at the cottage

Delicious and beautiful

Many people always want to do things for themselves, or on their own, even to grow mushrooms. Not only mushrooms and not oyster, disputes which (scientific mycelium), professionals send to everyone. But other, real mushrooms.

Many people like the chanterelles are one of the most common fungi. The chanterelle harvest is by volume to about 20% of the harvest of all the mushrooms growing in the woods.

However, there is a way to grow mushrooms! In the summer you can be at home or at the cottage with fresh mushrooms: chanterelles, porcini, mushrooms and others. And if their salt, pickle or dry, and in winter this delicacy us will be available.

Yes, we will be sure that these mushrooms were not going, for example, somewhere along the highway, where the lead from the exhaust of engines Nemer.

Instruction

Difficulty level: Easy

What you will need:

fresh or dried mushrooms

straw

an old stump or a log

water

step 1

Mushrooms, mushrooms, mushrooms...

As was the case when after processing of mushrooms in the country, the basin of water, in which were different crop of mushrooms, tossed under a tree. And a miracle! After a few weeks (since the summer was rainy) this place has grown edible mushrooms.

The statement offers a simple way to grow any fungi way transfer of fungal spores to the soil near the cottages.

2 step

Chanterelles

On the site where we plan to grow mushrooms, preparatory work on the ground. It laid wetted material (science calls him the substrate).

Here and will continue to grow mushrooms. Under substrate use sawdust or straw.

The substrate the substrate should be light, identical to the native conditions of the mycelium.

3 step

Fresh mushrooms

The first method of growing edible fungi with spores of fresh mushrooms. To do this, their hats break them up into pieces and together with cut the lower parts of the legs, which they grew in the ground, placed on a prepared and Oblastnoy soil.

After 2-5 days legs, crop, and hats can be removed. Landing can be covered with straw to the ground was wet. After a few weeks you can remove your mushroom harvest.

step 4

Full clip mushrooms...

Another way you can use the caps of old dry mushrooms. Again cook at home or at the cottage the ground, then crumble hats, irrigated soil and wait for the appearance of fungal germination.

5 step

Mushrooms on a stump

And the third way of reproduction of fungi for themselves migrate from old forest tree or stump, carocci infected mycelium. When transferring this piece of wood should be put on a special place, much like what it brought. And then we have to maintain favorable for fungal growth conditions. It is the presence of moisture, the leaves on the ground, shadows, different species of trees: aspen, birch, pine, spruce, under which they grew up.

Can be used for growing mushrooms is already available at the cottage rotten tree or stump. You need to neverlet a few holes and put the mycelium. Don't forget to water the mycelium, then then we will harvest mushrooms.

6 step

Harvest mushrooms from his suburban area

This mushroom is and educational time. What a pleasure to harvest mushrooms grown with their own hands the whole family! Children will remember it for life! And they have learned father

7 step

And soon so will collect at his dacha

We especially want to say about some of the most popular mushrooms, which was born this statement CHANTERELLES. This is the only mushrooms that are not afraid to be in a bag of mushroom, backpack, bag, because they do not crumble and tear.

Chanterelles it is edible, fragrant, sweet, tasty mushroom. You can eat in roasted, dried, cooked, pickled and salted forms. An indescribable taste of sauces and seasonings chanterelle. Chanterelles are rich in micronutrients, they have a lot of zinc. This fungus has medicinal value. Substances contained in chanterelles, destroy agents of purulent diseases.

How to make mild Lecho?

Lecho pleasant vegetable appetizer that can be used as a base for soups. Sweet and sour taste Lecho will remind You of winter about the richness of the autumn harvest.
Instruction
Difficulty level: Easy
What you will need:
Tomatoes, 3 kg
Pepper, 1 kg
Carrots, 1 kg
Onions, 1 kg (optional)
Vegetable oil, 300 gr.
Table vinegar, 200 gr.
Sugar 300 gr.
Salt, 2 table. spoon
step 1
Tomatoes, peppers, carrots, wash, sort and cut into medium-sized pieces. This is good to use the harvester. At the request of the mixture add the sliced onion and spices for example clove.
2 step
To prepare the marinade from the specified amount of vegetable oil, vinegar, sugar and salt.
3 step
In the pelvis or large saucepan, mix the workpiece for Lecho and marinade. Let stand at least 6 hours.
step 4
Put the pan with Lecho on the stove, bring the workpiece to a boil, let boil 5 minutes.
5 step
Cool ready Lecho, spread along the banks.

How to make the podium on the dashboard of the car

Make the podium for sensor charge pressure with your hands
In this tutorial I will share my experience of creating the podium for the car dashboard. As a concrete example, I decided to make the podium for sensor charge pressure, however, this statement is universal in the sense that it can be used in relation to any instruments and sensors. A key material that I used is plastic Polymorphus, characterized by the fact that he can mold like clay, making it very convenient to use. The bottom line is that we first make a form (body) for the sensor, and then create the stand for this form, through which will secure the podium on the dashboard. So, let's begin.
Instruction
Difficulty level: Easy
What you will need:
masking tape/duct tape
plastic Polymorphous
drill
savvy :)
step 1
Remove the wires so that they are not corrupt
First, remove the sensor wires in the beam and fasten them with tape. This is necessary in order not to damage them during manufacture of the podium.
2 step
Wrap the sensor with tape
Then wrap tape the sensor itself. It is necessary again in order not to damage it when oblamyvanii Palmarosa.
3 step
Olaplevel sensor Polymorfism
Blavim Polymorphous in hot water (temperature Celsius must be above 65 degrees), olaplevel them sensor, evenly distributing the material in his body. Wait when the plastic has cooled and hardened.
step 4
We drill holes in a frozen runway.
Retrieved sensor from frozen Polymorphous. To make the podium could be attached to the dashboard, drill it with a drill two holes for screws.
5 step
The podium on the dashboard is ready.
Voila! Our podium for sensor dashboard is ready. In order to fit it into the design of the car must be fitted his skin, but more about that in the following statement.

How to Woo ANY Man

How to Woo ANY Man
How to use the basic techniques of NLP, to inspire confidence in a person.
A very effective technique which some unconscious use.

Instruction
Difficulty level: Difficult
step 1
In NLP techniques, the trust is called Rapport.
It's the first thing you need to know.
In order to build trust you need to know what it is.
We will not go deeply into this concept.
Say:
People more than anything, trust Yourself!
From this we conclude that the more we humans are similar, the more we like him.
To establish rapport, we need to adjust to the person.
In this tutorial I will only describe the physiology, and the if statement will be required and will paint and other items adjustments
2 step
First what we need to adjust it to the body.
On what parameters you need to adjust?
MoSA:
If a person sits with his arms crossed, cross arm.
If so, and you should stand up!
In General I think it is very no need to explain.
3 step
Canter of gravity:
If a person is inclined forward, he has shifted the centre of gravity.
You must be able to adapt to it.
step 4
Aresty:
If a person likes to gesticulate, then try to repeat his gestures.
BUT!
IMPORTANT:
If you start to exactly copy his gestures it would be like the gamesmanship)
And people may be offended.
5 step
Monica:
Mimicry is a very difficult adjustment, for here it is necessary not to overdo it!
Therefore, if a person smiles, that smile, but not on a 32 tooth))
For example:
If it raises eyebrows when you listen, it makes sense also to raise them when the interlocutor something tells you.
The same goes for rolling eyes, nautia lips,
But if you do not feel comfortable doing, don't do.
Remember: the MAIN NATURAL!
Develop and facial expressions:
In the morning in front of the mirror will pokersite faces and modulates, polybytes, myself.
Lick out your tongue as far as possible and try to get to the nose))
Hardly the man to emotional appeal, if you will sit with a Poker face.
As well as the most important in the adjustment to please a person and cause him confidence , then work on it!
6 step
Perhaps the MOST EFFECTIVE element of this adjustment:
Tihanyi:
Here it is necessary to have a certain skill!
When you get into the rhythm of human breathing, you can already count on the sympathy of man!
Because this is a difficult skill to write a few tips:
1. women are breathing in the chest.
Men belly.
2. very convenient to monitor the collar when he gently rises.
In General it is very useful to connect peripheral vision!
3. very easy to line up outdoors in the winter))
4.if breath interlocutor very fast, try to breathe 1 time on his two exhalation.(I hope it is clear)
7 step
The most important thing in tuning it NATURAL!
That is, if people notice that you are repeating after him, then you have not aligned!
The final element.
Once you have firmly set up, start slowly to change their posture.
If you have well set up, then the source will follow you.
In NLP this is called dribbling .
This is the basis of influence on the person when you start it out!
Waiting for the reviews!

How to choose the bangs?

Want to let the bangs? Of course, because bangs in fashion today! But as not to be mistaken with the shape of the bangs? It is necessary to consider the type of facial hair .

Instruction

Difficulty level: Easy

step 1

Long oblique bangs are more suited to owners of square, oval and round face. Long geometric bangs should be done in order to shorten long, stretched face of the rectangular type.

2 step

Thick bangs will suit girls with narrow type of person. This bangs is contraindicated chubby girls. Direct, to the eyebrow-fits-all without exception.

3 step

When choosing bangs should be guided not only by the type of face, but also the age and growth. Little girls will have to abandon lush fringe, and high and full to the contrary is not "Kuts" bangs.

step 4

If you have thin hair, try playing bangs, which begins at the top of This visual will give more volume to the hairstyle.

5 step

If you have curly hair, do not make too thick bangs. Wiry and unruly hair in no case should not be cut short: bangs will stand upright.

How to paint designs on nails?

Beautiful manicure you can do yourself, arm yourself with a beautiful lacquer and glitter Forward!

Instruction

Difficulty level: Difficult

What you will need:

Colorless lacquer

Base varnish

Nail pattern (1 or more colors)

A needle or toothpick

step 1

On the prepared nail, apply the clear coat and leave to dry. Then cover the nail base coat: the base color you chose for manicure. Take the time base must be smooth, that figure fell more gently, without corrections.

2 step

The base layer of varnish make thicker and make sure that it is not a final high before you begin to paint. Apply drops of contrasting varnish, prepared specially for the picture. Spread with a toothpick.

3 step

Make sure that your hand does not flinch! Dream! Figure you can prepare in advance, and can come up with in the process.

step 4

In any case, a simple BLOB and artistic divorces, too, will look original. Besides all this "art" can be decorated with rhinestones and sequins, and the top cover retainer or layer of colorless nail Polish.

How to fall asleep quickly?

Midnight tossing and turning from side to side? What can you do? Just need to properly prepare for sleep

Instruction

Difficulty level: Difficult

step 1

If you want easy to fall asleep, make it a habit to eat dinner no later than 2-3 hours before bedtime.

2 step

Take before bedtime douche. This will be of benefit to the organism as a whole.

3 step

Ventilate the room before going to sleep. In the stuffy, and, especially, smoke-filled room to sleep much more difficult.

step 4

To fall asleep better in complete silence.

5 step

Before sleep, think about something pleasant. The main thing is not to think about work, about the upcoming urgent matters or issues. Fantasize! For example, think about what you would like to see in a dream.

6 step

The most important thing for healthy sleep - comfortable bed and pleasant to the touch, clean linens.

How to get rid of depression?

How to cheer yourself up and to feel again the joy of life? A few tips

Instruction

Difficulty level: Difficult

step 1

Avoid loneliness. Try to spend time with family and loved ones people.

2 step

Exercise, this will give you a burst of new energy and positive emotions.

3 step

Plan your life in advance. The main thing is that the graph was the most dense! Give yourself a few goals and at the same time encourage them. They say that "for two hares will run after..".... However, in our case the hare one - stop feeling depressed. A balanced life and a busy schedule will not allow you to get bogged down in depression. The main thing is not perenapreglis!

step 4

Pamper yourself! Buy something tasty, go shopping and buy a bunch of knick-knacks, arrange a day off! If possible, take a vacation and take a trip with friends where warm sunshine!

5 step

During the working week it is hard to relax, especially if many urgent matters. Sometimes it seems that the meaning of life only in continuous running. This is not the case. Just need to find something for which to live and endure some of life's troubles. For example, hobby! Take care that you are interested in, that will help you to Express yourself! For example, study a foreign language, start to sew or knit, become a collector! The choice is huge!

6 step

Liven up your life with something new! Easily re-arrange the furniture in the apartment, hang new curtains! And most importantly, learn to enjoy life!

How to cure conjunctivitis

Conjunctivitis is very unpleasant and infectious disease. This inflammation of the mucous membranes of the eyes, where the eyes are itchy, red, eyelid swells. And the most unpleasant, that from the eye stands out mucus, white, yellow or green. The nature of occurrence of conjunctivitis may be different, so the ophthalmologist should apply mandatory (!!!). but if for some reason it is at this point in time is impossible, then start treatment immediately.

Instruction

Difficulty level: Easy

What you will need:

penicillin

cotton pads

boiled water

step 1

In any case, do not meddle with fevered hands to the eye and not lock it, otherwise the eyes will start to hurt, you may see a bruise. Know, want to scratch really, but have to endure!

2 step

Buy in the drugstore penicillin. Usually it is sold in powder form in a small bottle.

3 step

Open the bottle and pour the powder boiled water to the top of the bottle. Shake well the bottle and the solution for rinsing eyes ready! Apply the solution on a cotton pad and wipe all areas of the eye, including eyelashes. Don't forget before the procedure it is good to wash your hands. For each eye, use a different cotton pads, otherwise the risk of transferring the infection to healthy eyes.

step 4

If you have a sore one eye, then wipe the solution should still both eyes. Otherwise, the infection can appear on a healthy eye.

5 step

Wipe eyes with a solution as often as possible. This tool is very effective, and very quickly gives the result.

6 step

You can also wash them with infusion of chamomile (sold at pharmacies), or strong tea. But on my own experience I can say that most penicillin is better.

How to make the podium on the dashboard of the car

Make the podium for sensor charge pressure with your hands

In this tutorial I will share my experience of creating the podium for the car dashboard. As a concrete example, I decided to make the podium for sensor charge pressure, however, this statement is universal in the sense that it can be used in relation to any instruments and sensors. A key material that I used is plastic Polymorphus, characterized by the fact that he can mold like clay, making it very convenient to use. The bottom line is that we first make a form (body) for the sensor, and then create the stand for this form, through which will secure the podium on the dashboard. So, let's begin.

Instruction

Difficulty level: Easy

What you will need:

masking tape/duct tape

plastic Polymorphous

drill

savvy :)

step 1

Remove the wires so that they are not corrupt

First, remove the sensor wires in the beam and fasten them with tape. This is necessary in order not to damage them during manufacture of the podium.

2 step

Wrap the sensor with tape

Then wrap tape the sensor itself. It is necessary again in order not to damage it when oblamyvanii Palmarosa.

3 step

Olaplevel sensor Polymorfism

Blavim Polymorphous in hot water (temperature Celsius must be above 65 degrees), olaplevel them sensor, evenly distributing the material in his body. Wait when the plastic has cooled and hardened.

step 4

We drill holes in a frozen runway.

Retrieved sensor from frozen Polymorphous. To make the podium could be attached to the dashboard, drill it with a drill two holes for screws.

5 step

The podium on the dashboard is ready.

Voila! Our podium for sensor dashboard is ready. In order to fit it into the design of the car must be fitted his skin, but more about that in the following statement.

How to make automatic computer shutdown without third-party software

Not long ago faced the problem, I needed to do automatically shut down the PC. Often when watching movies fell asleep, it was not very convenient because the laptop or worked all night, or until discharged battery. I needed to make automatic shutdown PC, and other, non-licensed software I don't like. Have I made it using the normal Windows. Now I'll tell you how to do it.

Instruction

Difficulty level: Easy

What you will need:

Computer, laptop

Windows

step 1

Create text document. txt, open it and change the extension to. bat .

2 step

Will continue to write code in my case it shutdown-f-s-t 30

Here is the full command description

Usage: _shutdown [-i | - l | - s | - r | - a] [-f] [-m \\<computer>]

[-t xx] [-c comment ] [-d up:xx:yy]

Without arguments displays help on the use (and is?)

-i Display interface, must be the first parameter

-l Output (not compatible with the-m option)

-s Shutdown the computer

-r restart the computer

-a termination of the shutdown system

-m \\<computer> Remote the computer that is running

action

-t xx Timeout shutdown xx sec.

-c Comment (maximum of 127 characters)

-f Force applications to terminate without

notice

-d [u][p]:xx:yy the reason Code for the shutdown

u user code

p code is scheduled to be completed

the xx basic reason code (1 to 255)

yy additional reason code (1 to 65535)_

3 step

Save and move it to facilities on drive C.

step 4

Further, it is necessary to find the standard Windows task Scheduler . It can be start All programs accessories system tools Scheduler jobs that run.

5 step

In the program window, select Create basic task and follow the wizard. In step action you choose to run the program and select our newly created file. The computer is off at that time you indicated.

6 step

If you want to make a timer that shutdown-f-s-t 30 where 30 is the time in seconds that you specify after how many PC should shut down and startup file.

How to make money on Forex is not working?

Robot

All dream of such work, where you have to make a minimum of effort and which will be a big salary. I will teach you to earn on Forex without your participation! Without risk!

Instruction

Difficulty level: Easy

step 1

Move to action: Go to air-forex. ru downloadable course with the robot. Robot (expert Advisor) is designed for automated trading in the Forex market. It is only to activate, and it will start to trade without risk, without losing money!

2 step

In the downloaded course will be video tutorial (method) how to install the robot (expert Advisor) so I am not going to describe the installation. Only tell how and what to do. After installation of the robot, select GPBUSD currency pair. Set the speed of opening transactions M5. Include robot, the trade went, now it is important not to interrupt her. Try that if the robot was switched on for a long time, the only way you can earn a lot!

3 step

Now describe the types of trade:

Aggressive Earn a lot, but there is a chance to lose everything in one day (not soon)

Moderate Earn decently, the risk is 10% (the best option)

Calm Earn a little, but without the risks (suitable for beginners)

step 4

Determined at a Moderate!

Put on Deposit from 10 up to$ 100 cent account.

Put in the settings 1.0 lot.

Per day doing about 5-10% i. e on the day received over$ 10 a month for 1000$.

For those who are afraid to make a real account, then you can do demo$ 10,000 and put on them the robot, after you verify its effectiveness boldly opens real.

Now let's talk a little bit about the robot: It is made up of a professional in the sphere of Forex and it contains all the trading strategy. He alone opens and closes deals in the case of the profit. Losing trades with a Moderate form of almost no.

Now you ask, how much I earn.

My first Deposit was 10$, earned per month 121$ and then realized that you need to unleash more money. Put another 500$, the amount of the Deposit was 621 and more I haven't changed. Now only take profit per month from$700. If I just include the robot and make their case!

How to make handgum their hands

Handgum or so-called chewing gum to hand this plastic toy, similar to a large gum to soften hands and training of fine motor skills.

Instruction

Difficulty level: Easy

What you will need:

PVA glue

Sodium tetraborate

Small capacity

step 1

Take to start any small capacity, can be a disposable Cup, but best conventional glass beaker from home. Open a bottle of white glue any brand and pour in the glass of the desired number for future handgum and.

2 step

Take purchased at the pharmacy sodium tetraborate, it is located in a small bottle, about the size of a bottle of iodine, and pour sodium tetraborate in a glass with glue.

P. S. the more add sodium tetraborate in the glue, the stronger will be the end of our future handgun.

3 step

Stir our resulting porridge spoon, pencil, whatever, to elasticity. As soon as it will be more or less not as liquid as before, gently taking it into my hands, with prematurely wound on her cloth and remove excess moisture by wiping it from all sides.

step 4

In the end You should get this ball do not understand that . Handgum is ready!

Can now do with it what you want! Knead in hand, to pull, and if you leave it on the surface, it acquires the ability to flow like water.

P. S. in order to make it color, before adding sodium tetraborate, should be added to the adhesive guasch paint we need color, the main thing is not to overdo it. You need to pour a little paint and at the same time to disturb him until the desired concentration and color saturation.

How to get rid of split ends hair

Many people split ends hair, even the models, despite all sorts of masks and professional care! In this article you will learn how to properly care for your hair. And so proceed!

Instruction

Difficulty level: Difficult

What you will need:

professional hairdressing scissors

kefir

bran

time

patience

step 1

To get rid of split ends must be cut off! I do not advise to cut off at once 10 see Because you can save them , and on the length and density of hair is not affected. But if you need to preserve the length, then cut each damaged tip. This is a complex process, so ask someone you have helped. Take strands for a little bit and cut only split the tip. We must remember that the invalid can be not only the tip, but the middle of the hair, so do not be lazy and look at the hair entirely.

2 step

The process of cutting split ends can take a week or more. Once you have them already cut, podrobnaya them if you want. And be sure to make a mask of yogurt, he will feed cut hair and give tips rounded.

3 step

This method is used long-haired models. Because the long hair has split ends quickly(and models it is a frequent occurrence), all of them can be seen with hairdressing scissors in his hands.

Another secret dlinnovolosyj models at a time when there are no auditions or shows they head to try to wash as little as possible and without shampoo. Very well washes hair this shampoo: yogurt+bran, which must first grind.

How to please a classmate?

.....

Like the classmate simple, if there is a head on his shoulders and her head is what is called gray matter)))

Instruction

Difficulty level: Easy

What you will need:

brains

the desire to do something

confidence

sincerity

step 1

.....

I will start with the banal your classmate is a normal girl like all the others, but all girls love when they help guys, for them there is nothing more important (well, almost) male help so help her. Only sincere. Without left hints. What to help her solve itself)))

2 step

.....

Girls love flowers so give them to her, only to find out in advance what she likes the most. It's not hard, Believe me. It would wish to do something

3 step

.....

Give her more attention after class, take her home, help carry her things, tell us something funny to cheer her it's not hard. We only need to consider the mood of the girl and to choose appropriate moments. It is not unimportant

step 4

.....

Find her total Hobbies you can equally like to read books or you and her like aquarium fish, and maybe she likes horoscope and you too or she likes racing or computer games as you find common themes for discussion about it and start talking to her. The main thing is that it was interesting

5 step

.....

Vidalaya among classmates will Ask how? answer is easy . Change your style, change your manner of talking, expressed the usual thoughts of the beautiful words (women love with their ears, don't forget)

How to make a temporary tattoo?

If you like real tattoos, but you can't afford because of my upbringing or to ban parents to make a real tattoo, you can make a temporary. And to help you can such things exist in almost any in the house.

Instruction

Difficulty level: Easy

What you will need:

Cardboard (white)

The printer

A penknife or scissors

Scotch

Aerosol paint

Ear sticks

step 1

Let's start:

Using the printer to print the pattern on the cardboard, it is desirable to make multiple copies. I advise you not to take mega complex drawings, as subsequently you will provide a lot of difficulties. Now, cut along the contour of the figure, but so that when you cut do not cut the excess paper, it is convenient to make a penknife. Remaining after cutting the paper, save, its the path we need. Other copies of drawings do the same. Locate the main lines in the figure, cut them out along the contour into separate parts, cut them a little (literally a millimeter) on the edge.

2 step

Now attach the cardboard to cut out a place on the site of the tattoo. With adhesive tape to attach the contour sheet. Now attach the most part, the suitability of the edge and secure it, with the condition that the distance between the parts will be about 1-2 mm Exactly make all the details of the picture. Now in a stationary position of the member who made the tattoo, apply the spray to the entire drawing, so that would be manifested main line. Now, gradually separating part of the figure, and apply the paint, after drying on her stick tape. (in order not to accidentally cause excess paint on this place

3 step

Now need “finishing”:

In any cover type spray paint and using ear sticks, draw all that is not immediately drew aerosol and draw the missing parts or align all edges.

How to make a smoker

Oh, how tasty meal of soup smoked meat or nakopivsheesya fish with beer. In order not to buy expensive smoked products in store, you can smoke them at home. How to make a smoker for similar products, read below.

Instruction

Difficulty level: Difficult

What you will need:

Metal barrel (top 200 l)

Bricks

Sheet iron

Metal rods

Skewers

Shelf-grille of the refrigerator.

step 1

Make the case.

The drums cut out the bottom, should be a cylinder. Put it on the ground and in the lower part of the cut hole in the bottom. This hole will enter the furnace. It is made of bricks. Just put the bricks between which should be the solution, in a row on the sides of the holes, so that they seem to come out of the barrel. From the top, also with a solution, attach a sheet of iron. The furnace should be high enough to easily placed logs.

2 step

Finish the production process.

Just above the furnace must be attached to the cut according to the diameter of the barrel rack-bars from the fridge. She needed to fell the products were not directly on the ground. Just put a shelf-grating on metal rods that insert into the barrel in advance. Now the metal rods should be inserted in the upper part of the barrel. For this drill a few holes in her body. How many rods to insert depends on you, the more bars, the more quality you can produce. Cut old skewers not sharp pieces and fold. Get hooks that will dress products, and which will be suspended by the rods in the upper part. The smoker ready.

3 step

Properly smoke.

To start, fire up a few logs and bring them to the condition of the coals. They put sprigs of alder or other tree, with which you want to smoke, and sprinkle a little water on them to go smoke. The top of the barrel than any cover, such as an old coat, so that smoke does not come out. Smoke until tender. Be careful, the inside of the barrel must not penetrate the flames, only smoke.

How to cheer yourself up?

This may also mood to raise)) Bon appetit!))))

Autumn, autumn depression, autumn melancholy, tears fall outside the window is not yet slush and plusnine mess, but not green, gold, white, and gray days. Everything goes wrong, I want to hide so that all of you have forgotten, and not seem out of his corner. What if it's not so bad??

Instruction

Difficulty level: Easy

step 1

Dance, Dance!

Dance always, dance everywhere, only hearing the music and start to move to the beat! And may move only your finger in your pocket hail the power of life together with moving streaks! Because Musya rules the world.

2 step

Love!

And yet the world is ruled by Love. So Love the people around him(or one person, or yourself love, in the end), love my cat, my house, the tree near the window, cookies with poppy!!! And they will smile at you.

3 step

Draw!

Draw the sun! Crooked sunshine, handle on the leaflet in the box, or if you have forgotten how, in the Paint that is, Or face. Or the dog. Or the girl with the bow. Just be sure bright. Predni the hole with a pen, but may be brightly painted! Or take the marker. Red. Do let your red, neoconism slyly peeping at you from the edge of the table.

step 4

Cry.

Because tears can be invigorating. So cry, and then think and what was the roaring, all SO good!

5 step

And smile!

Smiling gloomy day brighter! Smile the monitor, someone will look at you and smile turning a finger to his temple Rejoice, another one razmeshayushihsya person more!

How to become an alpha male

as is known, the difference in the gene pool of humans and chimps is 1.1% and alpha gene it does not include

In each flock among animals is the alpha male. It acts as a defender and commander flocks. Females want to be with him and about 95% of all children from him.

It turned out that people have such a hierarchy also exists, but it is less pronounced and more complex. And among men is the alpha male. It can get stuck in any conversation, not even really knowing any of the themes and, most importantly, not to enrage those of others. Its easy to recognize among all. In this tutorial we will learn how to become alpha males.

Instruction

Difficulty level: Difficult

step 1

The main traits of an alpha male:

- charismatic (most importantly)

- believe in yourself

2 step

Can also be humorous, it is not necessary. Although, if the alpha male still has, it is preferable to use it.

3 step

Alpha male should not be quick-tempered, but calmly to indicate its place in the hierarchy, but not by words but by deeds. And then, a male, at each corner shouting I am the alpha male, I'm alpha male , gamma, or worse, omega.

Alpha male never engaged in Masturbation, because it takes confidence.

step 4

Alpha male should fancy to combine consumer relationship with pokroviteljstvom. Protection should be more than consumerism. Alpha males are not greedy for a freebie. Unprincipled principal. The formation of these two words are antonyms, but the vocabulary they do not necessarily have to be them. The unscrupulousness of this life by their own rules, and not driven by some authorities in the head principle to rationalize cannot. And integrity can be sustained pursuit of a goal.

5 step

Beta, gamma, Yes, and that there must be confessed, omega males form the goal is to take :to get an education, an apartment, a Range Rover and stuff like that. But alpha males form the purpose is to give : to Give decent housing to children to buy an apartment wife etc

6 step

Alpha males never met. If you complain, then only those who can help them, and not to extend it to three quarters of the information I am a poor, miserable, my wife threw . Alpha male should be optimistic, because the gray mass of people usually Vice versa, pesimisticno

7 step

Do not forget that being an alpha male is a big responsibility, not only a great power over all. Alpha male should take care of all his flock.

8 step

Of course, this is not everything that is typical alpha male, but by developing the above qualities, You will increase your rank.

I would like to say about the gray cardinals. Some people believe that gray eminences that alpha males. NO. As If the gray cardinal to give power, he will not be able to manage people, it has little charisma, less confidence. Grey cardinal only controls, and other duties alpha does not.

How to work in the program Sony Vegas(basics)

Videopool beginners

Hello. Today more and more popular program Sony Vegas, so I decided to write briefly the basics of using the program. How to start, learn and create glued a small clip in the program.

Instruction

Difficulty level: Difficult

What you will need:

Sony Vegas

Couple video

Brain and hands

step 1

A little searching on the Internet, you can find the definition of prog.

Sony Vegas - professional program for multitrack recording, editing and assembling video and audio streams.

It follows that we can deduce either audio or video, or all together.

2 step

Despite the functionality, Sony Vegas is very easy to use. The main tool in this mouse. With it you can widen/narrow/slow down/speed up video and audio tracks.

To trim a video or audio: click on the edge of the track and hold buttons, trim video(notice the track is the end. and if you exceed it, it will be shown, but not in the form of several pieces, and as a whole);

To slow down/speed up: Hold down ctrl and click on the edge of the track;

Smooth start or end At the beginning and the end of the passage we can find smooth transitions, which are demonstrated in the video. By the way, if you click the move right button, you can choose the configuration of the transition, but it should be considered more.

3 step

Pieces of video you can cross with each other, just adjust them. In options there is the ability to automatically transition from one to another.

Right clicking on the video track, you will see the option to Insert text media . It will allow you to insert the words in the right place and, if necessary, they can decorate, run in 3D or do they mask(the mask will cover in the next lesson)

step 4

It's not all the features of the program. More detail is described in the accompanying video.

How to make a real Cuban Mojito?

Summer is the best time for refreshing cocktails and parties. There are many reasons to celebrate a holiday or just a Friday with friends. Mojito is a traditional Cuban refreshing drink. He is sweet but sour, fresh and invigorating. This is the best choice for large companies and fun party. The difficulty level is moderate.

Instruction

Difficulty level: Easy

What you will need:

White or light rum (Bacardi Mojito) 50-60 ml

Lime

1.5 teaspoons of sugar

8 sprigs of mint

soda water, mineral water

tumbler

straw

ice

step 1

Put mint leaves in a tall glass. Carefully pour in the syrup or lime juice, the leaves can be slightly rumpled, but it is impossible to tear. Floating leaves of mint in the glass does not give the cocktail of elegance. Pouring mint leaves with lime juice we get from them extract oils, which give the cocktail a unique flavor.

2 step

After mixing lime juice and mint leaves, fall asleep with a glass of crumbling ice, the ice should be on top, so that leaves remained on the bottom of the glass, and not floated on top.

3 step

Add rum, followed by soda. Lightly stir and ... enjoy!

How to make CASCO

CASCO is a voluntary third party liability insurance. Practice shows that it is better not to save, and get the insurance policy. How to do this, read below.

Instruction

Difficulty level: Easy

step 1

Decide on need. Unlike MTPL, CASCO is purely voluntary. CASCO provides undeniable advantages to its owner. First, in the presence of the hull you receive compensation, even as the culprit. Secondly, CASCO involves a greater number of insurance cases: whether it be falling on the car, or even changing the situation in the cabin. And thirdly, if CTP total disbursements under the insurance policy does not exceed 400 thousand rubles, in CASCO they reach and even exceed 1 million.

2 step

Fill in. The procedure is similar to the CTP. Required documents similar (statement of conclusion of the contract, passport or other document proving your identity, the certificate of registration of the legal entity (if you face legal, of course), technical passport of the vehicle, driving license and proof of ownership of the vehicle). The calculation of the cost of the policy is based on many factors: the type and brand of car, experience and age of the driver (if insurance written several drivers, the price of the policy is calculated based on the worst rate, so if there is no need to write not very experienced drivers, it is better not to do), the presence/absence of anti-theft system, deductibles and so forth. And, of course, be careful when drawing up the contract, read it thoroughly.

How to make a generator elektroenergii of reels for fishing rods

Device

Somehow putting things in order in my room I found my fishing rod, in which I accidentally broke the leg of the coil, well to the fishing rod, you can buy a new coil, and this what to throw out? Neeeeed need to think of something, and devised a generator of electricity on the basis of this coil as a potential rotation axis is equal to 5 rotations from one rotation of the handle of the coil is very productive.

Instruction

Difficulty level: Easy

What you will need:

Actually the coil itself

Wire

Glue

Plastic discs with a diameter of 2 to 3 cm or a great pass (can be borrowed from the mechanism broken cassette recorder or VCR

Gum

Paper or melting silicon

An ordinary motor with a groove preferably large

step 1

Disassembled coil

First you need to disassemble the coil, to do this, click the button on the reel and take it off, then pull the plug and take off the nut, you can then remove the rotating mechanism.

2 step

How should look the installation of the motor on the leg of the coil

After you take the motor and attach it to the leg of the coil by setting the motor on the leg and holding the two pieces of wire covering the motor and the spool and sacla the place of contact of the motor and legs.

3 step

Great groove will transmit its movement muanikau on the motor

Take the plastic disk and cut it at the edges of the recess so that the gum did not abate in the center to make the hole bigger to install this ROM on a rotating axis, in my case, I just turned one item securing it with a piece of paper between the rotating axis and the detail and planted her already found a groove with an old washing machine and inside has filled the paper with a hole in the center, so that the groove was during the rotation exactly in the center so as not to be imbalance (there can pour the melted silicone)

step 4

Put a rubber band

Almost everything is left to stretch the rubber band between the large and the small groove of the motor and to rotate the reel, moreover, that one rotation of the handle is a 5 spins so even with a large groove the motion is passed at the little which significantly increases the speed.

So I was hoping to infect the phone or the battery, but my phone consumes charging 5 volts, and the generator produces 10 volts

As four of the king to turn in four of the six (focus)

Sometimes I want to surprise you with something friends. Tricks one of the most interesting ways to do it. You have a hand of four of a king. Pull from the deck six, replace one of the king on it. And voila! You can get your hands four sixes.

Instruction

Difficulty level: Easy

What you will need:

the deck of playing cards

wide transparent tape

a sharp knife or blade

enthusiasm

step 1

How to cut

Let me begin by saying that the focus is not with the Bay floundering. It should be prepared in advance. All the kings except one (in my case, the peak of suit), as well as all six, except one (also peak) should be cut diagonally. In the picture marked with a green line. Cutting can anyone more convenient, more importantly, so very smoothly and all the maps are identical. I, for example cut blade, sending it on a metal ruler.

2 step

What happens

Next, using a wide tape, you need to glue the card so, as shown in the picture. Half king to half of the six corresponding suit. Notice that this is the most important process. Do everything very carefully, so that the joint is almost invisible. The tape should be wider than the cards, so no laps, just a smooth surface. All unnecessary (I mean the tape protruding beyond the edge of the card) is also very neatly trimmed.

3 step

Now that we have three of the glued halves of the map, you can proceed directly to the focus.

These three cards are put on each other kings at the upper left and sixes to the right at the bottom and cover with a king of spades (he's whole and not cut). Folding fan, that he looked about as in the first picture. The impression that the hand of four kings. Ask someone from the audience to get from the deck of the six peak, and, in the meantime, we turn off the fan in the stack, so that we could see only the top card (king of spades). Put it on top of the six peak, and, holding her, pulling the king of spades from the deck and give it to the audience. During these steps, ensure that the rest of the cards (cut and pasted) were not visible to the audience. Until the surrender of the king, rotate the stack 180 degrees to six steel top left, and kings at the bottom right.

That is all. It remains only to gently expand the fan (just not to overdo it, so as not to Shine the joints cards) and the audience can see that in the hands of You four sixes.

How to play GTA IV on the network

Have you ever wondered how to play GTA IV on the Internet to compete with other players forces or just have a good free time for this game online? Of course, you can buy a license disk and not steaming log in online game. But, unfortunately, many don't have enough money for this, and not the fact that you enjoy the game. So I found a program for free games on the net.

Instruction

Difficulty level: Easy

What you will need:

GTA IV 1.0.7.0

step 1

The game requires version 1.0.7.0, which can be downloaded here . Not only that multiplayer will not want to work on the normal version, patch besides greatly increases the speed of the game, I advise you to put even those who were not able to play due to the high requirements of the game. Put the patch, then download the multiplayer . Essentially it's the same as San Andreas Multiplayer, only for GTA IV. Its installed in the game folder.

2 step

If you have no saves in the game, I recommend you take one or two missions and saved, don't know why, but I read somewhere that it's necessary. You can then log in online game by running the shortcut iv-mp on the desktop or in the start menu.

3 step

If done correctly, you should get a window on the entire screen. Select the server and connect. Then everything should be panatone have questions, write in the chat, if the server is English, you will certainly help. Enjoy the game!