How to make the podium on the dashboard of the car

Make the podium for sensor charge pressure with your hands
In this tutorial I will share my experience of creating the podium for the car dashboard. As a concrete example, I decided to make the podium for sensor charge pressure, however, this statement is universal in the sense that it can be used in relation to any instruments and sensors. A key material that I used is plastic Polymorphus, characterized by the fact that he can mold like clay, making it very convenient to use. The bottom line is that we first make a form (body) for the sensor, and then create the stand for this form, through which will secure the podium on the dashboard. So, let's begin.
Instruction
Difficulty level: Easy
What you will need:
masking tape/duct tape
plastic Polymorphous
drill
savvy :)
step 1
Remove the wires so that they are not corrupt
First, remove the sensor wires in the beam and fasten them with tape. This is necessary in order not to damage them during manufacture of the podium.
2 step
Wrap the sensor with tape
Then wrap tape the sensor itself. It is necessary again in order not to damage it when oblamyvanii Palmarosa.
3 step
Olaplevel sensor Polymorfism
Blavim Polymorphous in hot water (temperature Celsius must be above 65 degrees), olaplevel them sensor, evenly distributing the material in his body. Wait when the plastic has cooled and hardened.
step 4
We drill holes in a frozen runway.
Retrieved sensor from frozen Polymorphous. To make the podium could be attached to the dashboard, drill it with a drill two holes for screws.
5 step
The podium on the dashboard is ready.
Voila! Our podium for sensor dashboard is ready. In order to fit it into the design of the car must be fitted his skin, but more about that in the following statement.