How to handle pocket "in the frame"?

There are many types of pockets. Pocket "in the frame" as a rule, can be seen on the classic men's jacket or on the back of the pants.
Instruction
Difficulty level: Difficult
What you will need:
Knowledge of terminology.
Details of the cut.
The sewing machine.
The iron.
step 1
The terminology.
The attaching connection of small details and larger. Nastraivanie connection of the two parts by blending one part to another machine stitch. Turning of connection of the two parts on the slice, followed by screwing out them on the front side. The inflorescence emerge - temporary thread pinning obtachnyh edges of the parts, in order to give them a certain form. Priduzivanja - reducing the thickness of the seams, creases, folds and edges of the parts with iron. Sewing thread - fastening sections detail to prevent from fraying.
Details of the cut.
The main part is the place where will be located the pocket. The valance is a small piece of cloth the color of the product, is the aesthetic function. The obtachkoy item pocket, which then forms the processed entry into the pocket. This is part of the fabric of compacted adhesive gasket and zautyuzhenny in half. Adhesive gasket material to seal and prevent stretching. The lining of the pocket which constitutes the volume of the pocket.
2 step
Outline four lines - two horizontal and two vertical. Then from the inside to the main part paste adhesive strip, thereby preventing stretching of entry into the pocket. Zautyuzhenny obtachku impose on the part of the fold to the top of the chalk line so that its ends are equally beyond the vertical line. Pritachivajut it to 0,5cm from the fold, securing the line in the end. Similarly protecive and second obtachku, so that the fold approached the bottom chalk line. Then cut the log into his pocket. Cut between the lines with a cut in the form of triangles > <, not reaching vertical lines 1,SSM Through the slot pocket, inside out, turn stocks Welt. From the front side spawn frame and pritagivaut. The triangles at the end of the pocket clip dual machine stitch.
3 step
Slice valance obmanyvajut by a special machine. Then it is applied on the lining of the pocket and nastraivaut at a distance of 2mm from the frayed edge. After that, the lining of the pocket without valance impose on the bottom obtachku. Slices equalize and pritachivajut seam sm The lining of the pocket with nastrochennogo the valance impose on the top obtachku. Slices equalize and pave the engine line in the seam attaching the Welt. The lining obtochuyut seam in 1cm, starting and ending at the base of the triangles. In the end remove all the stitches temporary appointment and pritagivaut ready pocket. Ready!