How to reduce the number of mosquitoes in the apartment

Say No, mosquitoes in the apartment!

Summer! The mosquitoes! To fight them with the help of fumigators and aerosols easier, but the old proven methods more reliable. So, manufacture mosquito frame.

Instruction

Difficulty level: Easy

What you will need:

mosquito net, wooden slats, small carnation, staples(plastic or metal), pushpin.

step 1

Purchased a mosquito net in the store. She is now presented in a large assortment of colours. However, the smaller her cell, the more reliable will be the protection, even from the very small mosquitoes! Therefore, when buying, pay attention to it!

2 step

Measure the window opening or vents. And make preparations for the frame. There should be five. Two in height and three in width. On the window will last four (as it is not too large)

3 step

Make a frame on which subsequently stretching the mesh (it is little more than window opening). At the corners fastened with nails. And nailed one bar in the middle of the frame (it is needed for rigidity). Mesh cut to size and then attached to the frame rails or stationery buttons.

step 4

To set the grid is not prevented open and close the window it needs to be strengthened from the outside, as a rule, Windows open inwards. For this we need metal or plastic brackets. 4 pieces per box. Fasten them (two on the top and bottom of the window opening.

5 step

Put the grid in brackets, for the convenience of holding it for the average bar.

6 step

Just carefully remove the grille ventilation (often through the mosquitoes get to the apartment from the basement) in the kitchen and bathroom. Cut the mosquito net on the size of the lattice and with it put back.

7 step

After everything is done you'll be pleasantly surprised how dramatically reduced the number of mosquitoes in your home and life (especially at night) became calmer.