How to profinite snowboard

Dear boarders, slowly coming season snowboarding, it's time to get your boards from the pile of junk in the closet and prepare.

Instruction

Difficulty level: Easy

What you will need:

Chair

Another chair

Iron

Rag

Scraper (you can use a metal protractor or spatula)

Paraffin (wax)

step 1

First you need to choose the wax:

Yellow 0°/+10°C

Red +1°/-4°C

Purple -2°/-8°C

Blue -6°/-12°C

Green -10°C/-32°C

2 step

Now you need to prepare the workplace, since the wax is not easy to deduce from my mother's favorite carpet. The place chosen as close as possible to the outlet oroboides this space from legkovushka, bulky and Danevych items.

3 step

Conveniently put the Board on a chair or two chairs (depends on length) sliding surface up. First need to clear the Board from dirt, you can even wash it under the shower spray and wipe dry, if you did not do it after the last season, if made, scraper remove old wax, and then soaked alcohol cloth to wipe kolzak.

step 4

Gray iron at minimum power, so the wax melted but not burned. Take iron and directed his nose down at an angle of 45°-70° heated surface up. Press the wax to the nose iron (make sure to flowing wax does not fall into the hole of the iron and slowly lead this design over skalsjon how can evenly distribute the wax.

5 step

Now switchable iron at medium power and patting kolzak. After all the wax will be distributed, turn off the iron and leave a snowboard for 20-30 minutes to wax froze

6 step

Take a scraper and medium pressure remove the top layer of excess wax, obtained approximately 3 parallel wires along the boards (NOT 3 times in the same place). Now thick cloth (you may use a new sponge for dishes and use the upper hard layer) three Board in a circular motion. 's all ready!