Many watched American militants, where some steep peppers fine metal knives with iron handles , often wrapped with a rope or some kind of cloth. I will write how to make a good, quality knife, that it was not illegal.
Instruction
Difficulty level: Difficult
What you will need:
Saw Bistrita or mechanical saws
Grinding machine
Circles emery paper of different grinding
Bulgarian
Extensive fantasy
Rough grinding circle
step 1
To start, you need to think what shape and length of your knife. Option a great many, can use the Internet to search for pictures. When you have selected the picture, Nono to start making knives. First you need to paint the stencil on cardboard and cut it out with scissors, then you need to use the angle grinder to cut the workpiece from the saw on the stencil, adding approximately 5 mm for further machining.
2 step
Cutting the workpiece from the saw forward to the next: grinding machine grind the sharp burrs work, grinders using an emery wheel. Stative excess of those places where you could not cut grinder. Allow to cool the workpiece in the natural environment.
Now proceed to rough processing: grinding machine set grinding circle and begin to make the slopes. Note that the slopes should be the same on both sides. To facilitate can be used as seat for descents tape in several layers.
3 step
When the slopes are ready proceed to the final finishing of the workpiece. We put in a grinding machine the small emery wheel, and start turning all harvest sites. Otacilia accurate as possible, unnecessary scratches (deep need to grind off). once cleaned the workpiece, try it on the hand, if it is perfectly means you did everything right.
No comments:
Post a Comment