This statement is slightly out of season, but as they say prepare sledge in the summer, Winter street cleaning ice sometimes leaves much to be desired and so you have to slip and fall! A little advice on how to make your life easier at this time of year!
Instruction
Difficulty level: Easy
What you will need:
rubber glue, sandpaper, scissors, pencil, iron
step 1
You can use devices that are sold in stores, so that the shoes do not slip, but they are not always comfortable and look great (especially on women's shoes, awkwardly. In our case, everything will be discreetly and neatly!
2 step
Go to a hardware store and buy rubber glue BF(point and all similar adhesives fall away, as the frost becomes brittle, and BF, even in the cold remains elastic) and sandpaper No. 0.
3 step
Put the bottom to nardacci and tracing. Cut. For men will get two blanks (as the picture), and for a female (if the heel is small) one. A solid sole is cut out entirely. Smear glue the workpiece and the bottom and set aside for 15 minutes.
step 4
Include iron for maximum heat and put it on the workpiece(adhesive side out) for a few seconds. Then priceeven, tightly pressed to the sole. Do not be lazy to carefully press the edges of the workpiece to the sole, otherwise they will be a problem when walking and will quickly come unstuck. After gluing leave for a few hours for drying glue. It is best to glue the evening to the morning you can use the shoes.
5 step
Everything was ready. Now you are not afraid of the ice and the negligence of the wipers. Yes, and the appearance of the Shoe remains the same! Good and not slippery winter!
Do not dry the shoes on a hot radiator!!! You may come unstuck is not only anti-slip device, but also the soles!!!
No comments:
Post a Comment