How to assemble the icosahedron of NeoCube 216

There are neo cube and don't know what to do with it. Let's collect the icosahedron. How to do it I will tell you in their instructions. She would explain how to assemble this piece, because to instructions attached video. Open the manual and take neo cubic All the details inside.

Instruction

Difficulty level: Easy

What you will need:

NeoCube 216 (but use only 162 ball)

step 1

neo cube

And so we need rare earth 216 balls. And C it and we will sculpt the icosahedron.

2 step

hats

For manufacturing these hats, you'll need a long chain 50 balls (but they can't count and just do the item campaign. As shown in the photo, the first step is creating a vicious circle of 5 balls and then just wrap the tape of the balls until the item will not be 4 rows (photo shown). And such elements we need two things. Making them set aside.

3 step

3 rings

Next you need to prepare stripes 20 balls and connect from within the circle.

step 4

ring together

Collect rings as shown in the figure. The next ring should get to pass the ball, so you get the icosahedron smooth and without holes, and then a clear picture will not be visible.

5 step

ring with the first cover

Take one cap and connect it with the three harvested rings. All edges must be logged in pas as shown in the photo.

6 step

the dressing of the second cover

Put the second cap according to the picture to make triangles. The same thing all the lines go in pas. But then in the collection it is necessary to consider the figure and not to put the second cover parallel to the first then the picture will not come out there and shapes too.

7 step

almost ready icosahedron

Presses all surface covers (to then figure was not disclosed) and the icosahedron is almost ready. Left to Refine a few strokes.

8 step

2 ball for closing holes

Now we have 2 balls to close the 2 holes in the caps (sometimes you have to spin the ball to catch the polarity of the magnets).

9 step

ready icosahedron

Inserting 2 scoops of our icosahedron is ready.

10 step

It is also possible and the remaining balls to make another cover, but close only one hole of the icosahedron. Thereby making a stand figurei to put open hole figure stand, then the cube will remain just 4 scoops).

11 step

All good skills.