As well balanced wheel

In order to well balanced wheel, we need a balancing stand normal accuracy (Bosch, SECAM) , wheel adapter (Haweka), car/motorcycle wheel balancing weights.

Instruction

Difficulty level: Easy

step 1

System wheel alignment

Depending on the type of disc on the shaft of the balancing stand mounted wheel adapter. Commonly used universal cone, but it gives low precision. Wheel adapters are tapered, collet, flanged and special. Adapters type Haweka mounted either on the flange of the stand or on the shaft of the stand. The essence of adapters ideal setting wheel axis of rotation and the mounting angle when balancing.

2 step

Collet Haweka adapter

Tighten nut. Nut (nut, in the case of a disk without center hole) should be delayed in accordance with the instructions to the stand. In life so that the wheel cannot rotate, but not to drag this may affect the results of the balancing. The wheel should be firmly seated on the plug or adapter: no gaps, gaps, distortions. Before balancing cone you need to pay attention to the presence of burrs, scratches, traces the production of metal, the density of cones in the Central hole. Minimum clearance when installing the wheel can give a decent error, i. e. a gap of 0.2 mm, at wheel R16 provides guaranteed error of up to 15 grams, and 0.2 mm is the thickness of the paper.

3 step

On the panel of the input characteristics of the wheel and run the booth. After some time, the stand gives the values of the imbalance on the side of the disk. When using complex stands, the result can be more expanded, and the laser can illuminate the exact installation location balances. Install counterweight (sinker). Conduct a re-examination on the stand. From time to time (the more, the better), you can calibrate the balancing stand special gauge wheels .