How to make crafts well of matches?

Probably not one I sometimes fond of production of various imitations of different material. Because it takes the most of your free time, and then we can confidently say that I have spent time with, and be proud of his creation. I want to show how easy it is to do Well out of matches, and if you're a student and boy, this hack can easily be represented in the form of its project on technology or simply to please the teacher.

Instruction

Difficulty level: Easy

What you will need:

The matches.

The glue.

Hobby knife.

Rope.

The scissors.

The cloth(to wipe off the excess glue).

step 1

To step # 1.

We will begin our work with production base. To do this, we need to stick together four matches(as see in photo 1). Further above the base of the future wells will paste another series of matches. The most important thing: slide matches in opposite directions, this procedure is done every following row until you gain the desired height. For beauty and simplicity it is better to cut off from matches head(stationery knife). Make it in advance.

2 step

To step # 2.

The base at the well ready. Now take the stand. For this to two opposite sides of the well glue three matches(this is our stand), try to stick a match in the middle on both sides(you can even line to use). Central match should be just below the side(see photo).

3 step

To step # 3.

There are very few. Now two matches should be pasted on the reverse side of the lateral columns, made in the previous step (see photo 1). They need to attach future roof. Next, we need string or thin rope, cut the desired length, pre-take a toothpick, smear it with glue, and wind the thread on the toothpick (neatly as in the photo). Central hour you lower side, insert a toothpick in the rack. The toothpick is our goal.

step 4

To step # 4.

You need to glue the two pillars of matches perpendicular our racks. Support is needed for the production and stability of future roof. Do not rush to start to glue the roof, first, form its skeleton, for this glue 4 matches (beams) to the ends of the supports (see photo).

5 step

To step # 5.

And the last final step. Spread glue on all sloping match (beams) and make a roof.

It's an easy process, I think that comment is unnecessary.