How to build a greenhouse window frames?

As far as we know, the greenhouse can be constructed from many materials, including glass. You don't have to use a special glass, but it is enough to use the old window frames. This article will tell you about the proper construction of such greenhouses.

Instruction

Difficulty level: Difficult

step 1

First, the required perimeter need to pour the Foundation. It is not necessary that he was too big and wide. Make it based on what size will your greenhouse. As a rule, standard greenhouse window frames has a size in region 2 6 m To build the Foundation necessary to make the formwork. The Foundation will gain sufficient strength in 1-2 weeks. After the due date, you can return to work.

2 step

On the Foundation you need to install struts, which can serve as common blocks. These bars are fixed to the Foundation by means of anchor bolts. After we set the side stand. Then you need to make the lower harness design. For this you can use a regular whiteboard, which must be attached to the props conventional screws. After that, you need to install the intermediate rack, which also can be attached with screws, and they already set the upper harness.

3 step

Now set the frame (rafters for a roof. For this it is advisable to use the same wooden blocks. Be installed they should be tilted, i. e. in the form of a house. To sheathe the roof window frames undesirable, because they are very heavy and can simply not come. For its cladding will fit an ordinary plastic film, but still better than polycarbonate.

step 4

Now begin to install window frames. To fix them you need to the outer side of the frame. All the cracks, it is desirable to froth up the foam to the inside of the greenhouse did not circulate the air. Try to set the frame as closely as possible to each other. Good construction!